Startechcom RACKCONS2001 Manual de usuario

Manual Revision: 04/02/2013For the most up-to-date information, please visit: www.startech.comDE: Bedienungsanleitung - de.startech.comFR: Guide de l&

Instruction Manual7Auto tunePress the “Auto tune” button. The panel will adjust the display size automatically and also tune the panel to its optimize

Instruction Manual8Position1. Press the Menu button.2. Use the Down and Up buttons to scroll.3. Highlight Position and press the Menu button to ent

Instruction Manual9Recall1. Press the Menu button.2. Use the Down and Up buttons to scroll to Recall. Press the Menu button to enter, where you will

Instruction Manual10SpecicationsRACKCONS2001 / RKCONS2001GBDisplay Size 20.1”Panel Type Active Matrix TFT LCDResolution Capabilities 1600x1200 @ 60Hz

Instruction Manual11RACKCONS2001 / RKCONS2001GBHumidity 10 ~ 90% RHDimension 608.4mm x 448.7mm x 44mmNet Weight 15.5kgChassis Construction Heavy duty

Instruction Manual12Technical SupportStarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-l

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.StarTech.com is your one-stop source for every connectivity part

Instruction ManualFCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital dev

Instruction ManualiTable of ContentsIntroduction ...1Packagin

Instruction Manual1IntroductionPackaging Contents• 1U LCD Rack Console Drawer• VGA + PS/2 console cable• 3.5mm mini-jack audio cable• USB cable•

Instruction Manual2Mounting the console1. Adjust the sliding rail until the screw underneath is visible. Loosen (do not release) the two rear screws

Instruction Manual35. Gently extend the arms from the rails until they lock. Gently, but rmly insert the console into the left and right rails:6.

Instruction Manual48. Installation is now complete.How to UseConnecting the ConsoleTo connect the LCD console to a computer, perform the following st

Instruction Manual5Turning on the ConsoleMake sure all cables and the power adapter are connected properly. Be sure to tighten all connector screws. G

Instruction Manual6Testing the ConsoleTo test that the console is working properly, perform the following steps:1. Power up the rack console, and the